Kelvinator JS4BE-048KA Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Split-System-Klimaanlagen Kelvinator JS4BE-048KA herunter. Kelvinator JS4BE-048KA Installation Guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
SPLIT SYSTEM AIR CONDITIONER
*S4BE - 018KB, 024KB, 030KB, 036KB (1.5, 2, 2.5, & 3 TON) SERIES
14 SEER, SINGLE PHASE MODELS
IMPORTANT
ATTENTION INSTALLERS:
It is your responsibility to know this product
better than your customer. This includes being
able to install the product according to strict
safety guidelines and instructing the customer
on how to operate and maintain the equipment
for the life of the product. Safety should
always be the deciding factor when installing
this product and using common sense plays
an important role as well. Pay attention to
all safety warnings and any other special
notes highlighted in the manual. Improper
installation of the furnace or failure to follow
safety warnings could result in serious injury,
death, or property damage.
These instructions are primarily intended to
assist qualified individuals experienced in the
proper installation of this appliance. Some
local codes require licensed installation/
service personnel for this type of equipment.
Please read all instructions carefully before
starting the installation. Return these
instructions to the customer’s package for
future reference.
DO NOT DESTROY. PLEASE READ CAREFULLY &
KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
IMPORTANT SAFETY INFORMATION ...................... 2
AIR CONDITIONER INSTALLATION ......................... 3
General Information ................................................... 3
Before You Install this Unit ........................................ 3
Locating the Air Conditioner ...................................... 3
Packaging Removal ................................................... 3
Ground Level ............................................................. 3
Roof Mount ................................................................ 3
ELECTRICAL WIRING ................................................ 4
Pre-Electrical Checklist ............................................. 4
Line Voltage ............................................................... 4
Connecting Refrigerant Tubing Between the
Indoor & Outdoor Unit................................................ 4
Grounding .................................................................. 5
Thermostat Connections ........................................... 5
START UP & ADJUSTMENTS ................................... 5
Pre-Start Check List .................................................. 5
Start-Up Procedures .................................................. 5
Air Circulation - Indoor Blower ................................. 5
System Cooling ....................................................... 5
System Heating (optional) ....................................... 6
AIR CONDITIONER MAINTENANCE ......................... 6
REFRIGERANT CHARGING ...................................... 6
Charging the Unit in AC mode ................................... 7
Charging Charts & Application Notes........................ 7
Figure 2. Charging Chart (1.5 Ton Models) ............. 8
Figure 3. Charging Chart (2 Ton Models) ................ 8
Figure 4. Charging Chart (2.5 Ton Models) ............. 9
Figure 5. Charging Chart (3 Ton Models) ................ 9
Table 3. Charging Table (1.5 Ton Units) ................... 10
Table 4. Charging Table (2 Ton Units) ...................... 10
Table 5. Charging Table (2.5 Ton Units) ................... 11
Table 6. Charging Table (3Ton Units) ....................... 11
WIRING DIAGRAMS ................................................... 12
Figure 6. W.D. for 1.5, 2, 2.5, & 3 Ton Models .......... 12
Figure 7. W.D. for 3 Ton Models ............................... 13
INSTALLATION / PERFORMANCE CHECKLIST ...... 16
REPLACEMENT PARTS ............................................. 16
INSTALLATION INSTRUCTIONS
Seitenansicht 0
1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - IMPORTANT

SPLIT SYSTEM AIR CONDITIONER*S4BE - 018KB, 024KB, 030KB, 036KB (1.5, 2, 2.5, & 3 TON) SERIES14 SEER, SINGLE PHASE MODELSIMPORTANTATTENTION INSTALL

Seite 2 - CAUTION:

10SUCT. PRESS.OUTDOOR TEMPERATURE (°F)70 75 80 85 90 95 100 105LIQ.PRESS.DIS.TEMP.LIQ.PRESS.DIS.TEMP.LIQ.PRESS.DIS.TEMP.LIQ.PRESS.DIS.TEMP.LIQ.PRESS.

Seite 3 - 2” Mounting Pad

11SUCT. PRESS.OUTDOOR TEMPERATURE (°F)70 75 80 85 90 95 100 105LIQ.PRESS.DIS.TEMP.LIQ.PRESS.DIS.TEMP.LIQ.PRESS.DIS.TEMP.LIQ.PRESS.DIS.TEMP.LIQ.PRESS.

Seite 4

12WIRING DIAGRAMSFigure 6. W.D. for 1.5, 2, & 2.5 Ton Models7110050WIRING DIAGRAMNOTES:FIELD WIRINGLEGEND:LOW VOLTA GEHIGH VOLTA GECRANKCASEHEATE

Seite 5

13Figure 7. W.D. for 3 Ton Models71145208/14WIRING DIAGRAMNOTES:FIELD WIRINGLEGEND:LOW VOLTAGEHIGH VOLTAGECRANKCASEHEATER(OPTIONAL)312STARTCAPACto”C”

Seite 8

INSTALLATION / PERFORMANCE CHECKLISTELECTRICAL SYSTEMElectrical connections tight? YES NOLine voltage polarity correct? YES NORated Voltage: _________

Seite 9

2IMPORTANT SAFETY INFORMATIONINSTALLER: Please read all instructions before servicing this equipment. Pay attention to all safety warnings and any oth

Seite 10

3AIR CONDITIONER INSTALLATIONGeneral InformationThe S4BE series air conditioner is designed only for outdoor rooftop or ground level installations. Th

Seite 11

4ELECTRICAL WIRING WARNING:ELECTRICAL SHOCK OR FIRE HAZARDTo avoid risk of electrical shock, personal injury, or death, disconnect all electrical powe

Seite 12 - WIRING DIAGRAM

5• Providepowersupplyfortheunitinaccordancewiththeunit wiring diagram, and the unit rating plate. Connect the line-voltage leads to the ter

Seite 13

62. Verify blower wheel is spinning in direction indicated by arrow. Feel the air being circulated by the indoor blower and verify that it is cooler t

Seite 14

7Charging the Unit in AC mode(At outdoor temperatures above 55° F for optimized sub-cooling of 10° F - 12° F.)1. With the system operating at steady-s

Seite 15

8Figure 3. Charging Chart (2 Ton Models)20022024026028030032034036038040042044046048050052054056058060075 80 85 90 95 100105 110 115 120125 130 135Liq

Seite 16 - PROPOSITION 65 WARNING:

9Figure 4. Charging Chart (2.5 Ton Models)20022024026028030032034036038040042044046048050052054056058060075 80 85 90 95 100105 110 115 120125 130 135L

Kommentare zu diesen Handbüchern

Keine Kommentare